1, the installation height is low2, self-stabilizing structure3, long-term stability is good...

1. The mounting surface of the base on which the sensor is mounted should be smooth and clean, without any oil film or film. The mounting base itself should have sufficient strength and rigidity and is generally required to be stronger than the streng…

Classified by application: trade, process controlClassified by application environment: normal type, wet type, anti-riot type...

The weight transmitter is a special instrument that can convert the weight signal into a standard analog signal or digital signal and is designed and developed for the field control in the field of industrial control...

1. The flatness of the installation foundation of each weighing module should be within 0.3mm.2. The basis of each module should be in the same horizontal plane, and the plane requirement should be between 0.3mm...

On the scale body on which the weigh module is installed, if the scale body may be subjected to an impact from an object (in which case the weighing will suddenly change)...

The installation of the static load module should pay attention to the following three points:1. The static load weighing module is installed with a fixed module, a semi-floating module and one or two floating modules...

The dimensions of the top and bottom plates of each static load weigh module are the same. However, there are three ways to connect the top plate and the sensor...

The static load module is suitable for applications where the horizontal impact force is small.The dynamic load module is suitable for occasions where the horizontal impact force is obvious.

Weighing module for retrofitting existing equipment. Whether it is a container, a hopper, or a reactor, the weighing module can be turned into a weighing system.