In the combined strain pressure sensor, the elastic sensitive element can be divided into a sensing element and an elastic strain element. The sensing element converts the pressure into a force that is transmitted to the most sensitive part of the ela…

The choice of the form of the load cell depends mainly on the type of weighing and the installation space, to ensure proper installation, and the weighing is safe and reliable. On the other hand, the manufacturers recommendations should be considered.…

S-type tension pressure sensor is suitable for the specified standard weighing, such as platform scale and hopper weighing system, especially suitable for some industrial weighing systems with high precision...

characteristic(1) Linearity: refers to the degree to which the actual relationship between the sensor output and the input deviates from the fitted straight line. Defined as the ratio of the maximum deviation between the actual characteristic curve an…

In most cases, the use of appropriate mounting components can avoid incorrect loading, the load cell and the mounting components together form a complex functional unit, the weighing modules weighing module...

Pull pressure sensors, also known as resistance strain sensors, are part of the load cell series and are a device that converts physical signals into measurable electrical signal outputs. Widely used in industrial weighing systems, platform scales, el…

The sensor works on the principle of measurement of hydrostatic pressure. It generally uses a silicon pressure load cell sensor to convert the measured pressure into an electrical signal, and then is amplified by an amplifier circuit and compensated b…

The weight sensor should be handled lightly, especially the small-capacity sensor made of alloy aluminum. Any impact or drop can cause great damage to its metering performance. For large-capacity resistance strain gauge weight sensors, in general, it …

Traditionally, the load cell is a general term for load cells and load cells, and its measurement characteristics are evaluated by a single parameter. The old national standard considers the application object and the “weighing” and “measuring forc…

(1) The current sensor must be appropriately selected according to the rated effective value of the measured current. If the measured current is excessive for a long time, it will damage the final power amplifier tube (refer to the magnetic compensati…