1. Check whether the sensor capacity and load capacity match, and all modules should bear the load evenly.2. Adjust the level of each module to ensure that the joint surface of each module is not more than 0.5 degrees from the horizontal plane in the …

Weight transmitters, like sensors, play a pivotal role in instrumentation, instrumentation, and industrial automation. Unlike sensors, weight transmitters generally have a certain amplification effect in addition to converting non-electricity into mea…

The weight transmitter is actually equivalent to a converter, which converts the physical quantity into a telecom quantity. It is usually designed and manufactured for the industrial process resistance strain signal sensor by the SMT process, and is s…

In the process of using electronic scales (including electromechanical combined scales), the plastic deformation of the sensor may be caused by overload, impact, etc., which may affect the accuracy of measurement. In severe cases, the sensor may be da…

In order to ensure a high-precision test system, in addition to the use of high-precision A / D converters, other module design in the system also has a great impact on the overall system accuracy.(1) The sensor is the core of the whole system. To obt…

Load cells can be divided into two series The TR series load cells are used to measure the tension of a stretched plastic film or tape that is often used for winding on a mechanical guide roller. It can be mounted on the fixed and transfer shafts o…

Since load cells are now playing a role in all walks of life, load cells are also welcoming the era of rapid development. Although the load cell is still affected by environmental factors, the load cells requirements for capacitance and electric field…

When we select the load cell, the sensors instructions will have a lot of parameters to explain the performance of the sensor, which is anti-interference, temperature drift, and accuracy.One of the parameters is called sensitivity, which is generally …

When choosing a load cell, we must first consider the actual working environment. The working environment can affect whether the sensor can work normally and the service life of the sensor or even the reliability and safety of the entire scale. So wha…

1. The mounting surface of the base on which the sensor is mounted should be smooth and clean, without any oil film or film. The mounting base itself should have sufficient strength and rigidity and is generally required to be stronger than the streng…