-
Weight transmitter application
The weight transmitter is actually equivalent to a converter, which converts the physical quantity into a telecom quantity. It is usually designed and manufactured for the industrial process resistance strain signal sensor by the SMT process, and is s…
282014-05 -
4 key points to pay attention to when replacing the load cell
In the process of using electronic scales (including electromechanical combined scales), the plastic deformation of the sensor may be caused by overload, impact, etc., which may affect the accuracy of measurement. In severe cases, the sensor may be da…
262014-05 -
The base mounting surface of the load cell should be flat
In order to ensure a high-precision test system, in addition to the use of high-precision A / D converters, other module design in the system also has a great impact on the overall system accuracy.(1) The sensor is the core of the whole system. To obt…
242014-05 -
How to choose the load cell
Load cells can be divided into two series The TR series load cells are used to measure the tension of a stretched plastic film or tape that is often used for winding on a mechanical guide roller. It can be mounted on the fixed and transfer shafts o…
242014-05 -
Load cell requirements for capacitance and electric field
Since load cells are now playing a role in all walks of life, load cells are also welcoming the era of rapid development. Although the load cell is still affected by environmental factors, the load cells requirements for capacitance and electric field…
242014-05 -
Load cell sensitivity
When we select the load cell, the sensors instructions will have a lot of parameters to explain the performance of the sensor, which is anti-interference, temperature drift, and accuracy.One of the parameters is called sensitivity, which is generally …
232014-05 -
What are the errors of the load cell?
When choosing a load cell, we must first consider the actual working environment. The working environment can affect whether the sensor can work normally and the service life of the sensor or even the reliability and safety of the entire scale. So wha…
222014-05 -
SB cantilever load cell installation points
1. The mounting surface of the base on which the sensor is mounted should be smooth and clean, without any oil film or film. The mounting base itself should have sufficient strength and rigidity and is generally required to be stronger than the streng…
202014-05 -
Pull load cell installation
Pull load cells are available in two different mounting styles.The first type is a fixed base sensor installation that places the sensor in three fixed posts during installation. Therefore, it is required to use the occasion that the temperature varia…
202014-05 -
Weighing control instrument in the application of load cell
The weighing control instrument is an electronic device that converts the signal such as the load cell (or the weight transmitter) into a weight digital display, and can calculate and print the weight data. It is often used for automatic batching and …
192014-05